| Access
Point 450
Contact
a Representative
SYSTEM OVERVIEW
Access Point™ 450
is a mid-range IP/Internet access router designed to deliver world-class
IP services with the performance, security, and the Quality of Service (QoS)
control needed to build next-generation IP/Internet business services.
Access Point 450 meets the most demanding customer requirements in a
single highly integrated, high availability platform that is easily
deployed and managed as part of a carrier managed service or an enterprise
owned and operated network. This product employs an advanced system
architecture that achieves high-speed packet forwarding while applying
advanced services at very fine granularity. With data forwarding rates of
up to 200 Mbps and 3DES encrypted traffic forwarding rates of up to 80
Mbps, Access Point 450 sets new price and performance standards for
multiservice IP access routers.
Key Benefits
- Migrate users
from basic WAN access to more advanced virtual private network and
Service Level Agreement managed solutions with a single, purpose built
IP services platform
- Gain world-class
IP routing, advanced IP QoS, a stateful packet filtering firewall and
standards-based VPN security
- Integrated
traffic measurement and monitoring capabilities allow detailed charge
back, service level monitoring, and enhanced network planning
- Gain a fully SNMP-managed
system that easily integrates into existing management systems and
back-office services
Specifications
Hardware
Specifications
Dimensions
17.38" W x
2.62" H x 14" D
Standard rack mountable
Weight
14.5 lbs with two
interface modules
Available Slots
Four expansion slots for interface modules and accelerator modules
LAN Interface
Modules
Ethernet: 10/100 Base-T Ethernet (RJ-45)
WAN Interface
Option Modules
MSSI—up to 8 Mbps (V.35 or X.21)
HSSI—up to 45 Mbps
Quad T1/E1 with integrated DSUs (RJ-45)
Frame-based DS3 with integrated DSU (BNC)
ATM DS3 with integrated DSU (BNC)
ATM OC-3 Multimode Fiber (SC Duplex)
ATM OC-3 Single Mode Fiber—Intermediate Reach (SC Duplex)
ATM OC-3 Single Mode Fiber—Long Reach (SC Duplex)
Hardware Assisted
Encryption
Encryption Accelerator Module
Memory
Configurations
32 MB DRAM, upgradeable to 64 or 128 MB
Management Ports
2 x RS232 Console Port
Port Power
Requirements
AC Power Input Range: 90–240 VAC,auto-selecting, 50/60 Hz nominal
DC Power Input
Range: 36–60 VDC, 6A
Consumption: 125 Watts maximum
Environmental
Requirements
Temperature: 0°–50° C
Storage Temperature: -30°–65° C
Relative Humidity: 5–95% (non-condensing)
Safety
Certifications
UL 1950, third edition; CSA C22.2, No. 950; TUV/EN 60950; AS/NZS
3260 and TS001; IEC 950/CB Scheme
EMI/EMC
FCC Part 15 class A; ICES-003; EN 55022:1992 and EN 55082-1:1992, AS/NZS
3548; VCCI; CNS 13438
Homologation/Network
Certifications
US/Canada: FCC Part 68; CS03;ISDN-ST; ISDN-U; Quad T1/E1
Europe: Quad T1/E1: CTR-12, CTR13; MSSI: CTR-1, CTR-2; ST BRI CTR 3
Australia: TS-0016
Management
Command line interface via console or Telnet; embedded browser interface;
SNMPv2 and SNMPv3 support with standard and private MIBs; Split horizon
management for customer and network provider
Performance
Max Number of IPSec Remote Access Tunnels: 4,000
Max Number of L2TP Tunnels: 1,000
Max throughput (with 3DES encryption): 80Mbps
Max packet throughput (non encrypted): 148,000 pps
Software
Specifications
Routing Protocols
Supported
IP, RIP, RIP-2, OSPF, BGP-4, IGMPv2, DVMRPv3
VPN Tunneling
Protocols Supported
IPSec, L2TP (LNS)
WAN Protocols
Supported
Frame Relay, PPP, Multilink PPP, ATM, SMDS
Firewall
Packet filtering with state informed packet/port control
IPSec
Encryption/Authentication
PSec ESP with DES/3DES encryption, MD5/SHA1 authentication, anti-replay
Key Management
IKE,PKI, X.509 digital certificates
Quality of
Service
Class-based queuing with classification and auto-classification by IP
address, protocol, port number, domain name, TOS byte; DiffServ
classification and marking; bandwidth borrowing
Redundancy
Virtual Routing Redundancy Protocol (VRRP)
BGP-4 multi-homing
User
Authentication
PAP, CHAP, RADIUS
|