ITS and Avaya - Accesspoint 1000.

Access Point 1000

SYSTEM OVERVIEW

Access Point™ 1000 is a high-end IP/Internet access router designed to deliver world-class IP services with the performance, security, and the Quality of Service (QoS) control needed to build next-generation IP/Internet business services. Access Point 1000 meets the most demanding customer requirements in a single highly integrated, high availability platform that is easily deployed and managed as part of a carrier managed service or an enterprise owned and operated network. This high-end access router employs an advanced system architecture that achieves high-speed packet forwarding while applying advanced services at very fine granularity. With data forwarding rates of up to 450 Mbps and 3DES encrypted traffic forwarding rates of up to 155 Mbps, Access Point 1000 sets new price and performance standards for multiservice IP access routers.

Awarded for Performance

Access Point 1000 was recently awarded the "BCR Best In Test" by Business Communications Review. In the November article entitled, "Making VPNs Work," Access Point 1000 surpassed the other products tested with its high performance and other advanced features. With respect to its performance, the editors characterized this product as a "powerful beast." It also earned the top spot for advanced features, such as integrated routing, QoS, and flexible LAN/WAN configurations.

Specifications

Hardware Specifications

Dimensions
1.74" H x 17.3" W x 11.8" D
Standard rack mountable

Weight
12 lbs, without interface modules

LAN Interfaces
Ethernet: Two embedded 10/100
Base-T Ethernet (RJ-45)

Expansion Slots
4 PMC Expansion Slots for Interface Modules
2 Internal Slots for Accelerator Modules

LAN Interface Modules
Ethernet: 10/100 Base-T Ethernet (RJ-45)
Gigabit Ethernet (Multimode Fiber)

WAN Interface Option Modules
MSSI—up to 8 Mbps (V.35 or X.21)
HSSI—up to 45 Mbps
Quad T1/E1 with integrated DSUs (RJ-45)
Frame-based DS3 with integrated DSU (BNC)
ATM DS3 with integrated DSU (BNC)
ATM OC-3 Multimode Fiber (SC Duplex)
ATM OC-3 Single Mode Fiber—Intermediate Reach (SC Duplex)
ATM OC-3 Single Mode Fiber—Long Reach (SC Duplex)
Packet over SONET OC-3 Multimode Fiber (SC Duplex)
Packet over SONET OC-3 Single Mode Fiber—Intermediate Reach (SC Duplex)
Packet over SONET Single Mode Fiber—Long Reach (SC Duplex)

Processor
262 MHz MIPS RM7000

Hardware Assisted Encryption
Encryption Accelerator Module

Memory Configurations
128 MB SDRAM Upgradeable to 256 MB

Management Ports
2 x RS232 Console Port

Port Power Requirements
AC Power Input Range: 90–240 VAC,auto-selecting, 50/60 Hz nominal

DC Power Input Range: 36–60 VDC, 6A
Consumption: 125 Watts maximum

Environmental Requirements
Temperature: 0°–50° C
Storage Temperature: -30°–65° C
Relative Humidity: 5–95% (non-condensing)

Safety Certifications
UL 1950, third edition; CSA C22.2, No. 950; TUV/EN 60950; AS/NZS
3260 and TS001; IEC 950/CB Scheme

EMI/EMC
FCC Part 15 class A; ICES-003; EN 55022:1997 and EN
55082-1:1997 (IEC61000-4-3, ENV50204, IEC61000-4-4,
IEC61000-4-2, IEC61000-4-6, IEC61000-4-5, IEC61000-3-2,
IEC61000-3-3, IEC61000-4-11, env50204); 24; AS/NZS 3548;
VCCI; CNS 13438

Homologation/Network Certifications
US/Canada: FCC Part 68; CS03;ISDN-ST; ISDN-U; Quad T1/E1
Europe: Quad T1/E1: CTR-12, CTR13; MSSI: CTR-1, CTR-2; ST BRI CTR 3
Australia: TS-0016

Management
Command line interface via console or Telnet; embedded browser interface; SNMPv2 and SNMPv3 support with standard and private MIBs; Split horizon management for customer and network provider

Performance
Max Number of IPSec Remote Access Tunnels: 4,000
Max Number of L2TP Tunnels: 1,000
Max Throughput (w/ triple DES encryption): 155Mbps
Max Packet Throughput (non encrypted): 200,000 pps

Software Specifications

Routing Protocols Supported
IP, RIP, RIP-2, OSPF, BGP-4, IGMPv2, DVMRPv3

VPN Tunneling Protocols Supported
IPSec, L2TP (LNS)

WAN Protocols Supported
Frame Relay, PPP, Multilink PPP, ATM, SMDS

Firewall
Packet filtering with state informed packet/port control

IPSec Encryption/Authentication
IPSec ESP with DES/3DES encryption, MD5/SHA1 authentication, anti-replay

Key Management
IKE,PKI, X.509 digital certificates

Quality of Service
Class-Based Queuing with classification and auto-classification by IP address, protocol, port number, domain name, TOS byte; DiffServ classification and marking; bandwidth borrowing

Redundancy
Virtual Routing Redundancy Protocol (VRRP)
BGP-4 multi-homing

User Authentication
PAP, CHAP, RADIUS